Re: New pc build on its way
Posted: Mon Nov 07, 2011 10:49 pmnice case
TKC (The Killing Committee) Forum
Forum for gaming clan TKC, The Killing Committee
http://www.clan-tkc.com/phpBB/
New pc build on its way
Page 3 of 6
Posted: Mon Nov 07, 2011 10:49 pmRe: New pc build on its way
Posted: Sun Nov 20, 2011 3:49 pmgrabbed a H100 this weekend, though i found out i get a free h80 with the purchase of my cpu.
Re: New pc build on its way
Posted: Sun Nov 20, 2011 6:45 pmSell the H80 then, extra cash right? 
Nice speakers. I have the same set. Amazing sound for the price.
Nice speakers. I have the same set. Amazing sound for the price.
Re: New pc build on its way
Posted: Sun Nov 20, 2011 7:26 pmI noticed that you don't have a hard drive listed. I recommend ordering one later (when prices go down). For storage and also for Windows File Paging. You don't want that on your SSD or you'll kill them.
Re: New pc build on its way
Posted: Sun Nov 20, 2011 8:28 pmi'll be using my 1TB HDD from my current build. currently lapping the cold plate, pics to come.
Re: New pc build on its way
Posted: Sun Nov 20, 2011 8:55 pmBefore:
After:
After:
Re: New pc build on its way
Posted: Mon Nov 21, 2011 4:08 amWoah, what did you use to get the lines out like that?
Re: New pc build on its way
Posted: Mon Nov 21, 2011 4:18 amsand paper and some elbow grease :D
went from 220, 400, 800, 1000, 2000 then some rubbing compound. after the initial sanding of each grit i swap to wet sanding with that grit. also this has to be done on a perfect flat surface so i found it easiest to tape the sand paper down to a sheet of glass. here is my STORM water block it turned out a bit better.
went from 220, 400, 800, 1000, 2000 then some rubbing compound. after the initial sanding of each grit i swap to wet sanding with that grit. also this has to be done on a perfect flat surface so i found it easiest to tape the sand paper down to a sheet of glass. here is my STORM water block it turned out a bit better.
Re: New pc build on its way
Posted: Mon Nov 21, 2011 8:26 pmnice lap job, you can shave in it.
Re: New pc build on its way
Posted: Tue Nov 22, 2011 2:07 amearth7man wrote:nice lap job, you can shave in it.
i might do that!
now just waiting on my Christmas bonus so i can get more parts
might cut a hole into the side window and add a 120mm fan to get more air flow over the graphics cards.
Re: New pc build on its way
Posted: Tue Nov 22, 2011 4:22 amKnightwolf654 wrote:earth7man wrote:nice lap job, you can shave in it.
i might do that!
now just waiting on my Christmas bonus so i can get more parts
might cut a hole into the side window and add a 120mm fan to get more air flow over the graphics cards.
I have been contemplating this idea as well.
Re: New pc build on its way
Posted: Sat Dec 17, 2011 3:36 amnew toys!
Re: New pc build on its way
Posted: Sat Dec 17, 2011 3:49 amKnightwolf654 wrote:new toys!
ME LIKEY!
Re: New pc build on its way
Posted: Sat Dec 17, 2011 5:03 amNicey nice
Re: New pc build on its way
Posted: Sat Dec 17, 2011 5:35 amOooooooh *drools*