AMD about to release Radeon HD 6990 Dual-GPU

Forum for gaming clan TKC, The Killing Committee
http://www.clan-tkc.com/phpBB/
Pengwin wrote:You pretty much couldn't use it almost at all in your rig without a decent upgrade of PSU, processor, case, and possibly a bit more ram.
Also, it's AMD, so it wouldn't work on a computer anyway.
(TKC)TheCrimsonStar wrote:Pengwin wrote:You pretty much couldn't use it almost at all in your rig without a decent upgrade of PSU, processor, case, and possibly a bit more ram.
Also, it's AMD, so it wouldn't work on a computer anyway.
Wow...you're a bit behind. I upgraded in December.
AMD Phenom II x4 955 Black Edition O/C to 3.6GHz (Stock 3.2GHz) // Full load never goes above 43C
MSI 870S-G54 Mainboard
4GB Corsair XMS RAM (1 x 4GB)
Gigabyte Radeon HD 6870 O/C to 950MHz Core/1175MHz Memory (Stock 900MHz/1050MHz) // Full load never goes above 70C
RAIDMAX 730W Modular Power Supply
Cooler Master Hyper 212+ Cooler
Cooler Master Elite Black Mid-Tower Case
Runs BC2 flawlessly in max settings @ 1440 x 900, max aa/af. Oh yeah, and with the newest FRAPS build, I can record at that res and settings with no hit to my fps. AMD works fine, and doesn't turn my computer into an oven.
Foffkillz wrote:How can you get to record in that res without it hitting down your fps? I have the same prosessor clocked at the same speed, 4GB Corsair value ram and a Nvidia 560 Ti @ 970/1175 MHz. And the only way I can record, is by checking for the half size button in fraps and even then it drags my fps alot down. I I set it to full res (1680 x 1050), I get around 15 fps. Whithout fraps, the game never gets under 60 fps at max settings including AA and AF. Im I using wrong fraps or something? (And btw, my CPU touches the 50C mark, but goes never over that, and my GFX goes never over 55C.)
Foffkillz wrote:I take that one back... I was running 3.2.7 and now, Im running 3.3.0. It actually works. Tho my fps drops from 60 to 40, but what the heck, right?!
Awesome...
earth7man wrote:Man imagine a couple of those in crossfire.
(TKC)TheCrimsonStar wrote:for some reason, AMD graphics cards (according to benchmarks I've read) work better in BC2 than NVIDIA. no clue why. anyway, I run it at a lower res than you (1440 x 900) and in Vsync (constant 60fps) and it even stays there when recording. I'm sure if I turned Vsync off I would see a hit to my fps, but nothing that affects gameplay in the least bit. I also record at 60fps. lol. .
I know right? ONE is supposed to have roughly the power of 2 6970's.
Wow...you're a bit behind. I upgraded in December.
Pengwin wrote:Wow...you're a bit behind. I upgraded in December.
Yeah, I know. 730W should only be able to Crossfire or SLI a setup of cards such as the GTX 460 or the 6870, not the high power 6970. You'll need about 1000W. You will also run into heating issues with a $40 case without really nice fen placement/quantity, things are gonna get toasty! And 4GB of ram is not super high end by any means, which will need a tiny bit of an upgrade to match the rest of the setup that needed upgrading due to the oven you installed into your case.
Saying that nothing is wrong now doesn't mean you wouldn't run into issues if you install a 6990. I didn't ask for your computer specs.